The term hybrid refers to a fabric that has more than one type of structural fiber in its construction. In short, hybrid fabrics are woven from a wide variety of different fibers.

 

Hybrid fabrics are mainly distinguished by low areal weights, cost savings.

 

They are often used for their striking cosmetic appearance in composite components. Although hybrids are most commonly found in 0/90 woven fabrics, the principle is also used in 0/90 stitched, unidirectional and multiaxial fabrics.

 

The common hybrid combinations are Carbon / Aramid, Aramid / Glass and Carbon / Glass. The latter typically look like carbon, as the glass is transparent when wet out. When designing with carbon / aramid fabrics, note that aramid fiber has a negative axial coefficient of thermal expansion (CTE) like carbon fiber, but the radial CTE is twice that of epoxy. This can lead to micro-cracking in laminates and wicking of moisture into the laminate over time. In non-cosmetic carbon / aramid laminates it may be better to use an aramid liner separate from the structural laminate rather than using a hybrid.

 

If you are looking for the hybrid fabrics supplier, Taiwan Electric Insulator Co. Ltd. is a wonderful choice. You can find a variety of aramid fabrics, carbon fabrics, composite fabrics, hybrid fabrics and so on products on their website. Need more details? So what are you waiting for? Check out TEI’s product pages and let them know your requirements.

 

 

Article Source:

https://www.amtcomposites.co.za/products/carbon-glass-aramid-reinforcements/hybrid-cosmetic-fabrics

http://www.haufler.com/en/content/aramid-fibre/hybrid-fabrics/

Share