What shoes making machine would I need to open a real shoe factory? Today I’m going to walk you through a mass production shoe factory and detail all the shoe factory equipment you will need to do it right.

 

I’m just going to show you what you need to make a standard die cut, cold cemented sneaker. This is a simple shoe made with only die cut parts. The outsole is a one piece rubber cupsole with a die cut midsole inside and channel stitching.

 

First, the modern shoe relies heavily on sub-contract factories for many specialized operations. For example, the outsole units will be developed by the shoe factory technicians but the tooling is made outside and the parts are purchased from a company that specializes in rubber pressing. The shoe factory controls the components to insure the uppers and outsoles all fit together correctly.

 

Back inside the shoe factory, the first operations in the manufacturing process are the cutting and marking operations. The factory will need cutting presses, also called clicker cutting machines. These cutting presses require cutting dies for each shoe pattern part. A new technology for cutting is the computer controlled drag knife cutter. These machines use a vacuum table to hold materials in place while the blade cuts all the pattern parts. This technology is critical for custom mass production. The clicker press is one of the standard pieces you will see in every shoe factory.

 

Once the shoe parts are cut they need to be processed. Alignment marks are screened printed on parts and any logos are added. Logos can be silk screen printed, Radio Frequency welded or embroidered on the cut parts.

 

Once the parts are ready and sorted into assembly kits it is time for stitching. The basic electric sewing machine does the bulk of the heavy lifting. With the stitching processes broken down into many smaller operations, the workers quickly master their specific tasks. Operated by an experienced sewer these basic machines can make magic.

 

Operated by a rookie, the same stitching machine can be used to make a disaster.  The sewing machines come in many types: post, long arm, short arm, etc. The stitching line will have hundreds of these machines, more or less depending on the complexity of the shoe design. The style of machine will also depend on the specific operations required to make each shoe design. Once the stitching is finished it is time to set the shape of the toe box and heel counters. These machines heat the thermoplastic counters inside the toe and heel then clamp the shoe to set the shape.

 

With the upper almost complete we will need a special sewing machine to finish it.  The Strobel sewing machine was invented by a guy named…you guessed it. Strobel!  This machine is used to sew the bottom fabric on to the upper. This closes the upper. The fabric bottom or “sock” is marked with alignment lines to insure the upper is straight and not twisted. Now the upper is ready for lasting and assembly.

 

With the shoe ready for assembly it is time to bring out the heavy equipment. The basic assembly line is about 100 yards long. On the front of the line you will find a steam to soften the shoe uppers, preparing them for lasting. The lasting machines are used to get the uppers pulled down tight on to the shoe lasts.

 

The toe lasting machine is the centerpiece of the lasting equipment. This machine takes hold of the upper and physically pulls it down around the last. The machine simultaneously pulls the upper into place while injecting hot glue to fix the uppers into place on the last. Once the toe lasting is complete, the shoes waist and heel may also be pulled into place by hand operation or machine processes. Following the lasting operations, the lasted upper is placed into the first of the tunnels on the line. In this case, a cooling tunnel that shrinks the upper down to the last even tighter.

 

Now the lasted uppers and outsoles are on the conveyor line together, each receiving two coats each of primer and cement. After each application the parts are placed back on the line to travel through a heat tunnel to dry the parts.

 

Once the parts are fully primed and covered with cement it is time to join the parts together. A worker takes the upper and sole in hand, fitting them together. Once the parts are fit, a pressing operation insures the bonding surfaces are completely in contact.

 

The pressing operation compresses the bottom, sides, and heel of the sole and upper together. To set the bond, the lasted upper with the bottom attached is often placed in a chiller unit. Once out of the chiller unit the shoe is de-lasted by hand or by machine. Depending on the design the shoe, there may be just a few operations left. The shoe may receive channel stitching with a special oversized sewing machine that can stitch through the rubber outsole the entire thickness of the upper. Finally, the shoe may pass through a dryer oven and UV light tunnel to insure there is no possibility of mold growth while the shoe is in transit.

 

MINZ Inc. is the professional shoe making machine manufacturer. They divided shoes machines into three parts, one is cutting machine including plane type and traveling head type, another is cutting machine energy saving system, and the other is automation development equipment. Their average energy saving is 70~90% comparing to traditional power system. If you are interested in learning more information about shoe making equipment, try to visit the website of MINZ now!

 

Article Source: http://sneakerfactory.net/sneakers/2016/09/shoe-factory-equipment-need-make-shoes/

Share